How To Remove Your Inground Pool Light

If you need to remove your inground swimming pool light you can so so in a few minutes with a screwdriver. If you look down at your swimming pool light you will see a hole in the top of the light ring. Inside this hole you will find a screw that can be removed by turning it to the left which is counter clockwise. Once you have backed the screw all the way out, you will be able to slide the light out of the niche and then the light should float up to the pools surface.

Once you have repaired your pool light you can wind the cord around the back of the light and then place the light back into the pool light niche. Once the pool light is back inside the niche you can re-tighten the set screw that holds the light into the niche. Turn the screw clockwise to tighten it.