Clean Burn Waste Oil Heating Buyers Guide

Clean Burn is the leader in used oil furnaces in the world. These used oil furnaces have a unique design and manufacturing combination. Clean Burn has distributors in North America and in some other parts of the world. The company has its own set of standards that makes this company the leader in the industry. The manufacturing location is in Lancaster County, PA. They are a private company that works in conjunction with the industry associations and with employees of the United Stated Government and the Environmental Protection Agency. They set the standards and form regulations that have to do with the process of heat recovery and with recycling and the green effort with used motor oils.What makes Clean Burn a leader in the industry is the commitment to research and even in the development if their products. They used research on the most advanced technology, which will benefit different parts of the country besides the United States. The technology does a world of good in places like Europe, Russia and the Pacific Rim. Technology like this benefits everyone who wants to learn from their experiences. Clean Burn offers Used Oil Furnaces, Used Oil Boilers. If you own a business and would like to start saving money on your utility bills, check out the different models that Clean Burn has to offer. We will profile for you the Clean Burn 1400 Furnace, the Clean Burn 1750 Furnace, the Clean Burn 2500 Furnace, the Clean Burn 3250 Furnace and the Clean Burn 5000 Furnace. The best part about these furnaces is that they are all Energy Star rated. This means that these furnaces meet and exceeds the requirements set forth by the EPA. Clean Burn has led the industry with technology in the areas of heat recovery. Clean Burn works in conjunction with the EPA to help create some of the most important information that helps with technical criteria needed to set the standards for the industry. The idea behind this is to work together to provide acceptable ways to dispose or a way to recycle motor oil and other petroleum based fuels. The EPA represents the government side of this technology and Clean Burn represents their customers. The difference if any of the Waste Oil and Used Oil is that according to the EPA their official terminology to describe used motor oils and other hazardous toxic waste chemicals that need a higher temperature to incinerate properly. Clean Burn uses and prefers the term Used Oil and others agencies prefer Waste Oil. These Used Oils can be safely burned for heat recovery by the Clean Burn Furnaces made by the company. You will find that with Clean Burn you will see the term used oil but waste oil is the same. The EPA used waste oil as the act of incineration of hazardous waste, which is not in the scope of work provided by Clean Burn.

Clean Burn CB-1400 Furnace

The Clean Burn CB-1400 is one of the smallest used oil furnaces in the inventory. This is an economical furnace that will help you save money. This furnace has the capacity to provide about 140,000 BTU's per hour and would work perfectly in such applications as small garages, workspaces and even shops. This furnace has a factory installed patented heat exchanger that generates more heat than any other used oil furnace in the industry. The unit also has the longest cleaning interval of any of the other units in its class. The CB-1400 has lower stack temperatures with a higher heat output. This is an automatic flow control that offers no other adjustments made to fuel. These furnaces are perfect for space heating or part of the Clean Burn Recycling Center. You could use Crankcase oil, ATF or Hydraulic Oils or Fuel Oils Number 2, 4 and 5. The design has a swing away door and burner system that creates the simplicity of repairs and simple maintenance. The unit has a one of kind non-welded flue tubes, which will provide a longer life for your furnace. If you are looking for something small but powerful then check out the CB-1400 Furnace from Clean Burn.

Clean Burn CB-1750 Furnace

The Clean Burn CB-1750 Furnace offers an impressive 175,000 Btu's per hour and it is the company's smallest furnace in the class of low profile designs. This design makes it easy to install with more flexibility. The maximum oil consumption on this furnace is 1.2 gallons per hour with an Air Flow Output of 1700. The Air Compressor that is required on this unit is 2.0 CFM at 20 psi. The unit measures in at 83 inches x 29.25 inches x 31.5 inches. It weighs about 400 pounds plus. You would need an electrical supply of 115 volts, 60 Hz with single phase and a 20Amp circuit breaker. You could use Crankcase oil, ATF or Hydraulic Oils or Fuel Oils Number 2, 4 and 5. The furnace system includes the necessary components that include the Oil Supply Pump, Check Valve, Tank Filter, Vacuum Gauge for the Filter, a Wall Thermostat and a Barometric damper just to name a few. You will also find on this system an automatic flow control so there won't be any need for any type of fuel adjustment. It has a lower stack temperature, which will output a higher heat. The advanced burner system will preheat the oil and regulate the combustion produced by the unit. The CB-1750 offers great service and support for your heating needs.

Clean Burn CB-2500 Furnace

The Clean Burn CB-2500 Furnace is one of the larger low profile furnaces in the Clean Burn inventory. This unit uses 250,000 Btu's per hour and is perfect for garages or warehouses with 2 to 4 bay doors. This furnace is reliable and dependable and is efficient. This unit has one of the longest cleaning sections of its class. The CB-2500 uses a swing away burner and door that makes repairs and simple maintenance a breeze which in the long run will save you money and prolong the life of the furnace. The maximum oil consumption on this unit is 1.7 gallons per hour and the Air Compressor required is 2.0 CFM with 20 psi and the airflow output is 2700. This furnace measures in at 103.25 inches in length x 29.25 inches in width x 31.5 inches in diameter. This unit weighs about 509 pounds. You can use Crankcase, ATF and Hydraulic Used Oils or Fuel Oils of Numbers 2, 4 and 5. The CB-2500 was created from the ground up to burn used oils properly. These are energy efficient and Energy Star rated. There is no need for any fuel adjustments since there is an automatic control. This unit is perfectly safe to use in your garage or body shop.

Clean Burn CB-3250 Furnace

The Clean Burn CB-3250 Furnace is one of the biggest furnaces in the low profile class. It has a BTU per hour rating of 325,000. This furnace is UL listed for the function of a unit heater or perhaps a central ducted furnace. This is a one of kind furnace that you won't find anywhere else. It has flexible installation as well as many great functioning options to create the most efficient used oil furnace on the market. Since this is a low profile furnace it is perfect fro a limited ceiling height. This furnace was built from the ground up to eliminate a wide variety of used oils in the capacity for free heat. This unit does comply with the Environmental Protection Agency's regulations. You will also find some standard features such as a patented heat exchanger that is likely to produce more heat than other furnaces. It also has a non-welded flue tubes that provide a longer life. The burner preheats the oils and then regulates the combustion system making it safe by the EPA's standards. The CB-3250 offers a low stack temperature with a higher heat output. The automatic flow control suggests that there is no other fuel adjustments needed. The Clean Burn Distributor is completely trained and very experienced in the capacity of used oil combustion technology. If you choose the CB-3250, you would be getting one powerful furnace.

Clean Burn CB-3500 Furnace

The Clean Burn CB-3500 Furnace is one of the industrial grade used oil furnaces in the inventory. It is perfect for service operations that have 4 or more window bays where bigger amounts of used oil are collected. This unit uses about 350,000 BTU's per hour and can be used as a unit heater or a central ducted furnace. The maximum oil capacity for this furnace is 2.5 gallons per hour with an air flow output of 4200 and an air compressor requirement of 2.0 CFM with 25 psi. The unit measures 74 inches in length x 35 inches in width x 61 inches in diameter. The unit weighs about 836 pounds. The internal components of the Furnace are the oil supply pump, vacuum gauge for the filter, inline washable oil filter, tank filter and the check valve. This used oil furnace has a patented heat exchanger, which provides more heat than other standards furnaces. This furnace also has a lower stack temperature, which has a higher heat output. Overall this furnace is energy efficient and it could be the best choice for your business.

Clean Burn CB-5000 Furnace

The CB-5000 Furnace is the largest furnace in the used oil furnace line from Clean Burn. There are no other furnaces that the Environmental Protection Agency allows. This furnace is efficient at extracting heat from used oils. This unit uses 500,000 Btu's per hour. It is a great choice for larger repair shops and other service shops. The maximum oil capacity for this furnace is 3.6 gallons per hour with an air flow output of 5500 and an air compressor requirement of 2.5 CFM with 25 psi. The unit measures 78 inches in length x 38 inches in width x 73 inches in diameter. The unit weighs about 1036 pounds. The furnace system includes the oil supply pump, vacuum gauge for filters and a wall thermostat just to name a few. The CB-5000 offers a patented heat exchanger that will provide your space with the most heat from any used oil furnace. This Clean Burn Furnace has an advanced burner that will preheat the oil and regulate the combustion system. This system has service and support from the Clean Burn Recycling Center. This used oil furnace will be a great addition to anyone who has a large service business. Now that we have seen the best Clean Burn Used Oil Furnaces, it is important to select the right Clean Burn Furnace. Here are some of the ways to size a building when choosing a furnace. You have to check the air filtration, you should first check for any leaks near the doors and the windows. If there is a 1" gap around a 12-foot x 12-foot door then it is equal 1" x 3" hole in the sidewall of the building. Then you will need to do some building configuration. A long and narrower building could be a bit difficult to heat than a more traditional building. So make sure that you have the building configurations down to the tee. You will have to do a measurement of the height of the ceiling, if your building has a ceiling that is 14 foot high then you will have to put in ceiling fans to help re-circulate the heat from the ceiling to the floor. Then you should install one 3 bladed 56" industrial ceiling fans every 2,000 square feet of the inside of the space. You will want to make sure that your building is insulated or the building will be harder to heat. When you are heating a large building you may need a larger furnace than you thought. Especially when you have a building where the bay doors will be open and closed frequently. Your heating appliance should be based on the heat loss of the building. If you choose to size the furnace based on the amount of the used oil that you generate then you will not be able to properly heat the building. Clean Burn recommends that all furnaces be sized based on their output BTU's per hour and not by the BTU's input. It is important that you properly size the furnace so that you get the most maximum efficiency otherwise you may be wasting money. It is also recommended that you do not remove the old heating furnace from the building if the unit is working properly. The old unit can actually give off auxiliary heat on those very cold days in the winter and it could also provide back up heat too. Contact your Clean Burn Distributor if you have any questions.