Carlin Residential Oil Fired Burner

Carlin Burners are one of the top three burner companies in the world. Their burners are unmatched. When homeowners purchase a new boiler, they often choose Carlin for dependable and reliable ignition to help heat their homes. Carlin has three types of burners, the gas fired burner, the dual fuel burner and the oil burner. Carlin's Oil Fired Burners have a reputation for being spot on reliable with an excellent firing rate. There are 2 standout Carlin Advanced Oil Burners that customers choose over any other. The Carlin 102 CRD and the EZ Pro Advanced Oil Burner. We can offer a look into why consumers and even professionals prefer the Carlin Residential Oil Fired Burner for their heating needs. The Carlin 102CRD, the 99FRD and 100CRD are three different models of the Advanced Oil Burner. They typically have similar specifications. The only difference in the three is the input Gallons Per Hour but we will get to that in a minute. The 102CRD, 99FRD and the 100CRD have the same design, they all have an adjustable head assembly. This is a great feature for mixing fuel and air. These oil burners have been used in boilers and in furnaces from residential applications to small commercial buildings. But they are the preferred choice of oil burners for residential homes. The Input of the 99RFD is 0.50 to 3.00 Gallons Per Hour, the 100CRD uses 0.50 to 2.25 Gallons Per Hour and the 102CRD uses 2.00 to 3.50 Gallons Per Hour. The recommended fuel oil that should be used in these Carlin burners is Number 1 or Number 2 Fuel oil for burners in the United States and in Canada it is recommended that a Number 1 or Number Furnace Oil is used. The power that is used for the 102CRD, 99RDF and the 100CRD is 120 vac, 60Hz and single phase, the current on the 99FRD and the 100CRD uses 5.5 amps and the 102CRD uses 6.0 amps. Each burner has a limited circuit input of 120 vac and 60Hz. All three burners use a 1/6 horsepower, 3450-rpm and 60Hz motor. The motor frame is 48 fame with an M flange. The Controls on these Carlin Models are the Carlin Model 41000 Solid State Electronic Ignition and the Ignition Voltage is 14,000 volts. These burners are UL listed in the United States and Canada. The EZ Pro Advanced Oil Burner offers the boiler an excellent range of power and they are extremely reliable. Carlin. EZ Pro is available in three different configuration the EZ-1, EZ-2 and the EZ-3. You will need to let the representative know the tube length when you order one of the configurations. All three configurations offer the same specifications except of the Input. The Input on the EZ-1 is 0.5 to 1.65 GPH, the EZ-2 uses 1.50 to 2.25 GPH and the EZ-3 uses 2.00 to 2.50 GPH. The fuel oil recommended for these burners are a Number 1 or Number 2 Fuel Oil in the United States and in Canada a Number 1 Oil or Number 2 Furnace Oil. The electrical power used on these burners is 120 vac with single phase and 60 Hz. The amount of Current used is about 5.8 amps. The Motor uses a 1/6 horsepower, 3450 RPM's with a 48 M Frame motor. The Oil Valve Power uses 120 vac and 60 Hz. The Nozzle heaters are 120 vac and a 60 Hz. The ignition is a Carlin Model 41000 Solid State Electronic Ignition and an Ignition Voltage of 14,000 volts. The Controls on the EZ Pro Series are the Carlin 60200 Microprocessor Control with a 15 second Trial for Ignition and a 1.3 sec FFRT. The maximum ambient operating temperature limits are 104 degrees Fahrenheit.