Comments on: Water Tech Pool Blaster Catfish

By: visit here

visit here — Tue, 10 May 2016 00:43:24 +0000

This piece of writing is genuinely a nice one it helps new web people, who are wishing in favor of blogging.|

By: astuces clash royale

astuces clash royale — Tue, 26 Apr 2016 05:29:18 +0000

Do you mind if I quote a couple of your posts as long as I provide credit and sources back to your site? My website is in the exact same area of interest as yours and my visitors would definitely benefit from a lot of the information you provide here. Please let me know if this ok with you. Thanks a lot!|

By: Andy Innes

Andy Innes — Fri, 18 Oct 2013 02:44:24 +0000

Hi, looking to purchase one of these for myself in new Zealand, do you sell overseas to us. If so will it work in NZ as we are on 240V power. Can you assist us on this.

By: Kevin

Kevin — Fri, 01 Jun 2012 02:35:39 +0000

I just bought the pool blaster catfish ultra and it didn’t come with the AC charger. Can anybody give me the specifications on that so I can get one at RadioShack? I just need the output voltage and whether the inside (pin) or outside is positive or negative. Any info will help. Thanks

By: Denise

Denise — Tue, 07 Jun 2011 22:03:12 +0000

Where is the on/off switch on the Catfish? Still trying to figure this out, just bought it, haven’t used it yet. I see on the cap it says “turn on and align with arrow”. How do I turn it on??? thanks.

By: Kenneth Clem

Kenneth Clem — Sun, 18 Jul 2010 06:36:07 +0000

Almost forgot…..you got to take the end cap off to turn it on and off a/c cheap on and off switch sticks…

By: Kenneth Clem

Kenneth Clem — Sun, 18 Jul 2010 06:26:14 +0000

Works great…..but you need to take it apart and oil the motor…..end cap made out of cheap plastic(probably from China)cracks and water gets in…..a little vinyl adhesive and plastic tape cured this……for a 100 bucks you would think they would use some better material for the housing….algae claim is a little far fetched……use a mop

By: Al Eidenberg

Al Eidenberg — Mon, 07 Jun 2010 11:08:23 +0000

The box advertises that the Catfish will also clean algae off the pool walls. Is this true? I would use it primarily to brush algae off the pool walls and be able to suck it into the vacuum before it drops back into the pool to blossom again. Sounds great, if it really works. Thank you.

By: Vicky Miller

Vicky Miller — Sun, 23 May 2010 15:52:30 +0000

We purchased the Catfish for our above ground pool last year. Put it in the garage in the box and remembered it this year! It is an awesome vacuum! However, I cannot get the attachment for the floor to stay on the darn thing!? It just slides on the front, but there is nothing to secure it there? Why is that!? When I go to put it in the pool and push it down to the pool floor, the attachment comes off and floats to the top?! Very aggravating! So, here I am trying to use the long, telescopic pole with the catfish attached, with no attachment on the end…..takes FOREVER this way! Any suggestions would be wonderful!

By: laurieb

laurieb — Sun, 26 Jul 2009 12:18:10 +0000

I bought some extra bags and a resuable filter that I thought was the right size. Come to find out I purchased the wrong items. When I emailed pool blaster and asked them very nicely if I could exchange I didn’t get a reply. I am still waiting. Thier web site say customer satisfation is 100 percent. I don’t agree. My catfish won’t come on after I charge the battery. It worked great for 1 year as well. The second year is very disappointing to me. I notice the unit getting very hot during charge. I know chances are I need a new battery but I am not wanting to buy the wrong item and get stuck with it since the company won’t accept exchanges. (at leaast I know they won’t accept them from me).
I guess I will look for a different pool vacume from a different company. :(
Sorrry, my opinion is… Pool Blaster web site customer service is horrible!