Comments on: Water Ace Swimming Pool Pump

By: Jeremy

Jeremy — Thu, 28 Mar 2019 03:40:23 +0000

Well I think I bought and placed the rsp15 around 10 years ago it is now priming and was told it had been squeeling for about a week before this the lid and lid gasket got replaced what next

By: 1/4-Inch Drive Click Torque Wrench

1/4-Inch Drive Click Torque Wrench — Thu, 07 Apr 2016 21:03:51 +0000

Tremendous issues here. I am very satisfied to see your post. Thank you so much and I am having a look ahead to touch you. Will you kindly drop me a e-mail?|

By: tina

tina — Mon, 12 Aug 2013 14:03:08 +0000

I need a new part for my pool pump. it’s a 1.5 HP Water Ace on your diagram it’s part number 5. Impeller # on the back is 25054B003 (best I can read it anyway)

By: Frank Lynch

Frank Lynch — Tue, 18 Jun 2013 16:28:02 +0000

I have a water ace sump pump. I use it to water my garden. The pump is model R6S it is 1/6 horse. I need to find a power supply cord for it.

By: Michael

Michael — Mon, 06 Aug 2012 21:14:03 +0000

In reply to James Brown. Hi, James. You would need to contact either the manufacturer directly or affiliate vendors who carry the parts. For your convenience, we updated with the detailed pool pump parts diagram.

By: James Brown

James Brown — Sun, 05 Aug 2012 19:56:35 +0000

I need the electrical schroud for the rear of the motor. One of the contacts was loose and melted part where it connects. I need either the contacts or the entir schroud including the contacts.

By: Efrain

Efrain — Sun, 23 May 2010 08:55:31 +0000

Hi;

I have a 96R5 that is noisy at the pump area. It sounds like it might be the impeller scraping against the pump well (or whatever that is called).

I took it to Leslie’s supplies here in Tampa and the guy suggested that it might be the seal and/or impeller that are giving problems. Leslie’s does not service that pump and neither does any other regular pool supply place. I bought the pump at Lowe’s but they don’t carry that model anymore and they also don’t carry or order parts.

I’m not sure of what the exact problem might be with the scraping noise, but, even if I wanted the parts or service for it, I can’t find it anywhere.

Any suggestions?

By: Heather

Heather — Sat, 15 May 2010 14:08:46 +0000

In reply to Joseph.

Hey Joseph:
I plugged it in being the start of pool season and it was seized. I un-seized it and it ran but was more
noisy than usual. As a few days went by I just unplugged it because it was very loud. I figured bearings so
I tore it down. The bearings at the wet end were gone so bad it somehow damaged the rod. I did take it to
my repair guy and he couldn’t even get the bearing off-they even heated it. Good news though, he gave me
a rebuilt one for $90.

By: Joseph

Joseph — Fri, 14 May 2010 17:54:16 +0000

In reply to Heather.

Hi Heather,

What didn’t you like about it?

Did the motor go? Did the seal start leaking?

Let me know, I would be interested in hearing your story,

Joseph

By: Heather

Heather — Fri, 14 May 2010 13:30:40 +0000

I have a Wayne 1 hp swimming pool pump (or had) it’s in parts. It is a pile
of CRAP. Totally done after only 3 years. I definitely do not recommend
anyone purchase this product.