Comments on: How To Replace Taco 00 Series Pump Cartridge

By: th8 farming base th 11 update

th8 farming base th 11 update — Fri, 26 Feb 2016 19:12:31 +0000

pmch.com

By: Jim

Jim — Thu, 17 Apr 2014 18:27:18 +0000

From reading your instructions I’m assuming it is not necessary to turn off the water heater to replace my Taco 006 BC4. Is that correct?

By: Shaun

Shaun — Fri, 10 Sep 2010 13:43:18 +0000

Hi all. I have a question. My pump ( TACO ) that contains a 008-044RP cartridge is noisy when running. It is installed in my solar water heating system. In addition to the noise the relief valve on top spits out liquid ( this is a new development ). The cartridge was replaced by a local plumber just 2 years ago. Is it time to change it again or do i have another problem.

Thanks

By: stan

stan — Mon, 18 Jan 2010 12:53:47 +0000

Joseph,
Thanx so much for uour quick reply.
Is that 0-ring the same as the one for the cartridge?
Is there a drawing that shows it?
How do I describe it to a HVAC parts supplier?
BTW, I couldn’t pull up the 007 stuff you suggestd.It said that “hot-linking not allowed”.
Thanks again for your help.

Stan

By: stan

stan — Mon, 18 Jan 2010 10:38:17 +0000

I have leak that looks like it is coming out of either the square flange where the 4 bolts connect the housing to the motor assembly, or ( most likely) the circular seal that I assume is the “o” ring seal of the cartridge.
This happens during boiler shutoff at night ( thermostat reset) and I assume it was caused by thermal cycling.
My question is: where is this leak and what is the fix.
I would very much appreciate your response.

By: mike mansfield

mike mansfield — Wed, 06 Jan 2010 18:47:25 +0000

does the oo7 -f5 series pump run constantly when the power is on ? The pump is always running until power source is turned off . Thanks mike

By: Richard Reed

Richard Reed — Mon, 31 Aug 2009 20:50:08 +0000

Where can I buy a 008-044RP cartridge assembly and 008-005RP casing O-Ring? My location is central florida.

By: Wet Head Media

Wet Head Media — Fri, 12 Jun 2009 17:37:56 +0000

Hi Dennis,

The Taco 009 Pump can be installed both vertically and horizontal,

You can find even more information on Taco’s site here:

Model 009-IFC Cartridge Circulator
http://www.taco-hvac.com/en/products/Model+009-IFC+Cartridge+Circulator/products.html?view=ProdDetail&current_category=53&Product=38#

Hope this helps,

Joseph

By: Dennis

Dennis — Fri, 12 Jun 2009 15:59:08 +0000

does the Taco pump 009 have to be horizontal or can it be installed vertical?