Comments on: Adjusting The Pool Frog On Your Pool Filter System https://wetheadmedia.com/adjusting-the-pool-frog-on-your-pool-filter-system/ Plumbing, Heating and Pool Repair Guides Sat, 26 May 2018 22:07:22 +0000 hourly 1 https://wordpress.org/?v=6.0.11 By: Sarah Ruffin https://wetheadmedia.com/adjusting-the-pool-frog-on-your-pool-filter-system/comment-page-1/#comment-24618 Sat, 26 May 2018 22:07:22 +0000 https://wetheadmedia.com/?p=16734#comment-24618 We just started using the pool frog system a in early May 2018. Our pool has had terrible algae problems and we shock once a week. We went to change the chlorine canister today and the old one was full of chlorine tablets. Did we install it wrong? We used a knife to cut the top off on the clear line above the red line.

]]> By: Thomas Finnerty https://wetheadmedia.com/adjusting-the-pool-frog-on-your-pool-filter-system/comment-page-1/#comment-6846 Thu, 12 Aug 2010 20:30:38 +0000 https://wetheadmedia.com/?p=16734#comment-6846 In reply to Thomas Finnerty.

What to do I do if I am over Chlorinating with the pool frog bac pac?

1-If the chlorine reading is over 3.0 ppm, remove the POOL FROG bac pac from the from the POOL FROG Mineral Reservoir and test the water daily until the reading is down to 1.00 ppm.

2-Reinsert the POOL FROG Bac Pac, lower the dial one setting and test the water again in 24 hrs. If the reading has risen,lower the dial one setting again. Continue this process until proper reading is achiieved.

3-If over-chlorinating at the lowest possible setting, consider decreasing the circulation time. Depending on your pump size, you may be circulating the water more than is necessary which results in more chlorine than is necessary.

4-Conatct King Technology’s Customer service Department @ 800-222-0169.

]]> By: Thomas Finnerty https://wetheadmedia.com/adjusting-the-pool-frog-on-your-pool-filter-system/comment-page-1/#comment-6845 Thu, 12 Aug 2010 20:03:12 +0000 https://wetheadmedia.com/?p=16734#comment-6845 In reply to Jim.

I know the manufacturer does not recommend you add Chorline thru the skimmer saying this can cause damage to the canister.

]]> By: Jim https://wetheadmedia.com/adjusting-the-pool-frog-on-your-pool-filter-system/comment-page-1/#comment-6843 Thu, 12 Aug 2010 17:21:28 +0000 https://wetheadmedia.com/?p=16734#comment-6843 My frog’s chlorine level will not drop when putting in a new canister. If at 10 or 0 makes no difference. Have to remove canister to reduce chlorine. Is there any other adjustment or does need cleaning or replacing. Bough this year on line.

]]> By: Thomas Finnerty https://wetheadmedia.com/adjusting-the-pool-frog-on-your-pool-filter-system/comment-page-1/#comment-6698 Wed, 04 Aug 2010 20:04:13 +0000 https://wetheadmedia.com/?p=16734#comment-6698 I have a frogger system and can not get a reading for Chlorine from my test strips. I went to a pool suspply company and they also were not able to get a reading telling me the test strips do not detect chlorine from he frogger. What can I use to get an accurate reading of chlorine.

]]>