Reno Boilers are the newest in innovative designs; they are advanced in both engineering and technology. These boilers contain stainless steel heat exchangers that are located in the middle of the boiler.
The Combination Reno HE30C Boilers are designed to offer 25kw of heat to the central heating system and about 30kw of heat to the hot water circuits. This is a direct unit; the hot water will come right from the main water supply and right to the taps. This helps the hot water come to the tap faster, some other units you end up waiting fro minutes rather than seconds for some hot water.Some of the specifications of this boiler include a low NOX burner for lower emissions. The system as we mentioned earlier has a stainless steel heat exchanger, this system is always 100% tested and approved throughout Europe. The system is a compact design, which is perfect with basements with little or no room. The Combination has a HE30C offers a turn down ratio of 4:1. The system is equipped with an extremely quiet flue fan, the latest in control technology and design.
The design is a High Efficiency SEDBUK band A, the system also offers an onboard diagnosis system a downloadable history that can e downloaded with a laptop or Handheld PC. The system includes a LCD Backlight, an expansion relief valve and a stainless steel secondary hot water heat exchanger. The System Reno HE25S, like the HE30C is designed to offer homeowners a 25kW of heat to the central heating system and the hot water circuit. Inside the boiler are the safety controls that allow the boiler to be connected directly onto a sealed system. The installation can be completed with a fixing jig that is included with the boiler.
The System Reno HE25S offers some impressive technology; some of the specifications include a high efficiency SEDBUK band A boiler. For those not familiar with the system, A is the top of the efficiency ratings. This boiler also offers a low NOx burner that was designed to burn the fuel with little emissions. The boiler also offers a stainless steel heat exchanger and a 5-year warranty. The Systems Reno HE25S offers a fully modulating burner with a turn down ratio of 4:1. The system also has an onboard systems diagnosis systems, it is a self-diagnosis system that is easy to maintain and to service.
This boiler offers a 25kW of heat to the central heating system and the hot water circuit. This boiler is great for a replacement of any open vented systems. This boiler is a high efficiency with a SEDBUK band A rating. The boiler also offers an Internal Siphon Trap, the condensate from this unit includes a built in protection from the effects of freezing. The system also has Under Floor Heating System Compatibility. This means that the temperature is limited to meet the needs of under floor systems. The system flue can be up to 10 metres either vertically or horizontally equivalent in length by using either a concentric 60/100 or 30 metres in twin flue piping in 80mm. The system also has an on board diagnostic system, this includes an LED display used for maintenance and commissioning. Also included is a downloadable history of your boiler, it can be accessed with any laptop or Handheld PC.
Question: How compact is the Heat only Reno HE25H?
Answer: This boiler’s measurements are 640mm in height, 370mm wide and 300mm deep.
Question: Does every Reno Boiler come with a secondary heat exchanger?
Answer: No, only the Combination Reno HE30C has a secondary heat exchanger
Question: What is the SEDBUK System mean?
Answer: This is equivalent to the United States Energy Star Rating Systems. Every boiler and appliance available to the public has a SEDBUK Rating. The best rating is A; the second best is B and so on.
