Ideal Boilers offers compact boilers that fit just about anywhere. One of their premier boilers is the Classic SE, which stands for Standard Efficiency. The Classic SE is not designed with fancy features or hard to use controllers, it is a simple design with simple and easy to understand engineering. The Classic SE offers a variable thermostat best used for central heating that has an adjustable temp from 56 degrees Celsius to 82 degrees Celsius. The Output Btu’s are 30,000 per hour to 100,000 per hour (8.8 to 29.3 kW).
The Classic SE is for heat only applications, this boiler is perfect for fully pumped systems and gravity DHW pumped central heating systems. This boiler is a wall hung cast iron design that offers reliability and dependability. The Classic SE offers a perfect heating systems for replacement or upgraded boilers or for new construction. These are modern and contemporary boilers that look great anywhere. They even fit in the kitchen between the cabinets.
There are a few different models in the Classic SE series, the Series Classic SE FF, the FF stands for fan-fueled boiler, and this design is used for fully pumped systems. The Classic SE RS stands for room sealed boilers. This boiler design is perfect for fully pumped and combine gravity DHW and pumped heating systems. Each pump series has 4 different models, the 9, 12, 15 and 18.
In order to make the installations of these boiler go as smoothly as possible, certain clearances are needed to ensure proper installation. For proper clearance you will need 533 mm for the front of the boiler, on the sides you will need 5mm, the top of the boiler is 100mm and the bottom of the boiler 100mm clearances are needed.
Some installation tips for the Classic SE is an ideal heating load of about 10% of heating output that is controlled by using a room thermostat. The other rooms are capable of being controlled by a Thermostatic Radiator Valve or TRV. The Classic SE offers quiet operation and an efficient service.
Some of the standard components and accessories of these units come with a Roof Flue Kit that are made up of vertical connectors and roof flue terminals. The Twin Pipe Flue Kit is available in 80mm diameters. Other features and accessories include a weather collar (for flat roofs), a Twin Pipe Flue Extension, a Vertical Flue Extension and a Weather Universal Collar. Condensate Drain, Pre Piping Fame and a Condensate Trap.
You will need to have the proper connection ports; the gas supply connection is 1/2″ BSP female connections. The Flow Connection offers a 22 mm copper and a 22 copper return connection. The electrical supply needed is 230V to 50 Hz this connection will bring a power consumption of 100W. The water content will range from 2.7 liters to 4.6 liters.
Question: What type of Fuel is used on the Classic SE Boilers?
Answer: All models are designed to use Natural Gas but Propane is available in the fan-fueled models.
Question: Can I install this boiler outside?
Answer: No, this boiler was designed for indoor use.
Question: Why should I trust an Ideal Boiler?
Answer: Ideal Boilers is one of the most well respected names in the heating industry. Their products are tested and are certified before leaving the factory. Their boilers are 100% safe and reliable.
Question: Do I have to install the boiler in the basement?
Answer: No, because of the compact design and the wall hung design, you can install the Classic SE in the kitchen and even in the bedroom.
If you want to replace a boiler, consider the Ideal Classic SE. These are smooth running boilers with a high efficiency. They are dependable and reliable boilers contact your Ideal representative with any questions that you may have.
