Hayward SuperPump Diffuser Gasket Removal

Once you have removed the diffuser from inside of the Hayward SuperPump, You will gently want to remove the old diffuser gasket from the pump diffuser. Once the old gasket is removed you will want to clean the surface and then take your new gasket and install it where the old one used to sit. There will be a groove on the diffuser as you can see in the picture.

Hayward SuperPump Diffuser

Written By Joseph, Who has contributed 532posts.

You Are Here: WeT HeaD Media > Plumbing > Photos > Hayward Super Pump Diffuser Gasket Removal

You May Also Like This Content:

How To Replace Hayward Pump Cover Gaskets
One of the most common things that will go bad on your Hayward swimming pool pump with be the cover gasket or 0-ring. Depending on the model of the Hayward pump that you have will determine if you will need an o-ring or the gasket. Both the Hayward cover pump gasket and the cover o-ring
How To Unclog The Hayward Super Pump Impeller
If your Hayward Super Pump impeller has clogged with dirt or debris you will need to take apart the wet end of the pump. Removing the wet end of the pump will require you to remove the volute so you can gain access to the impeller. The first thing you will need to do is
How I (Joseph) Replace The Hayward Super Pump Impeller
Hi my name is Joseph I want to share with you how I change the impeller on the Hayward super pump. You’re going to need some tools before you can remove the impeller from the pump. You’re going to need a 9/16 open end wrench, you’re also the need a bucket of water to re-prime

Hayward Super Pump Diffuser Gasket Removal

Leave a Reply