The Crown Boiler’s line of Indirect Water Heaters are unmatched in the industry. There are 5 different models in the Maxi-Therm2 Water Heaters. They have a minimum Boiler Output of 106,000 Btu’s to 212,000 Btu’s per hour. Each of these models differ in Tank Volume, in the Series the Volume ranges form 40 to 114 gallons. Each unit is bigger than the next.
Some of the features of the Maxi-Therm2 Indirect Water Heater is that they are designed for a Domestic Hot Water System. The water heaters are completely tested for a maximum working pressure of 150 psi. Included with the Maxi-Therm2 Boiler is a Brass Drain Valve and a Temperature and Pressure Relief Valve. Never try to move the location of any of these valves, they may affect the operation of the water heater and they void the warranty.
The Maxi-Therm2 Indirect Water Heater is coated with a porcelain enamel tank, which will prevent rust and corrosion. The Heat Exchanger has 3 anodes that work to protect the heat exchanger from corrosion. The Water Heater is protected by 2″ of CFC Free Foam and along with appliance grade steel makes the heater more efficient than ever before.
The performance of the Maxi-Therm2 Indirect Water Heater is pretty impressive. With the Model Number MT040GBR, the First Hour Rating is 188 Gallons Per Hour, the Standby Heat Loss is 1.0, the Minimum Boiler Output is 106,000 Btu’s and the Coil Head Loss is 1.6. All of the other models have some of the same if not better specifications.
The Maxi-Therm2 Indirect Water Heater is compact in size, meaning that the heater is a big bulky heater that you have to clean out your entire basement to install. There is plenty of room for this model. The installation of this water heater is rather simple. The best applications for this style of water heater are a Small Office, Apartment and House.
The Maxi-Therm2 can be installed with other water heaters for use as a multi heater system. But there are just some measurements and specs that need to be looked over before you install the water heaters. There are some adjustments and some requirements that may arise when you install the water heater. So read all of the instruction manuals and spec sheets before you install anything.
If you are installing the Maxi-Therm2 Indirect Water Heater into a building for a dishwasher use, then it is recommended that you don’t. In the installation manual it states that Crown doesn’t recommend the Maxi-Therm2 to generate water 180 degrees Fahrenheit. That is one example why it is important to read the manuals. If you have any questions, you should ask your Crown Boiler Representative, they have all the answers.
Crown Boilers has the best products on the market today. They offer quality products as well as residential and commercial applications. Choose the specs that is right for your application, there is a Crown Maxi-Therm2 Indirect Water Heater for your application.
