The CFC is perfect for industrial buildings with central heat and an indirect hot water supply. The working pressure allowed on these units is 3 bars to 5 bar all depending on what the unit’s output is. The CFC is made of a strong stainless steel construction that carries a 20-year thermal shock guarantee. Some of the features of the CFC Fully Condensing Industrial Boiler are the 500,000 Btu’s to 2,500,000 Btu’s heating capacity per hour. Model CFC has a factory installed 316 Ti Stainless Steel Tubes, Tube Sheets and furnace. The unit works from Single Phase, 115/1/60 electrical requirements. There are no minimum return water temperatures or minimum flows from this boiler. For a large unit, the CFC is a quiet operating boiler with <70 dBA at full fire and <50 dBA at a low fire. This unit comes with a 10-year fireside corrosion warranty and 20-year thermal shock warranty.
Clearfire-Model CFH Steam Industrial Boiler
This Clearfire industrial boiler is a high efficiency boiler with an 85% efficiency when the boiler is on low. With this type of efficiency and the boiler is on low, there won’t really be a need to increase the speed or settings. This style boiler is a fully modulating boiler with a High Turndown with a variable speed blower. This unit works with a very low gas pressure, 14″ W.C. The Clearfire Model CFH Steam Industrial Boiler can use either Natural Gas or Propane. The unit is 10 horsepower to 40 horsepower.
The Clearfire Model CFH is rated a high efficiency because it helps in the reduction of the greenhouse gases that contribute to global warming. The Controls on this unit are CSD-1 Compliant. The CFH also uses anywhere from 15 pounds of steam to 150 pounds of steam. This model in the C-B Packaged Boiler System is a high efficiency boiler that uses an advanced system called the Fecralloy burner that was designed to hold the Pre-Mix of air and fuel, a perfect combination for the ultimate combustion mixture. When the boiler is operating at 125# of steam pressure the boiler’s efficiency is rated at 85%. Model CFV Industrial Boiler offers a Direct Spark Ignition, a low gas pressure of <14″ W.C. Don’t let the size fool you, the boiler runs extremely quiet, 70DBA. It is a Natural Gas boiler and it can hold about 150# of steam pressure. The electrical requirements are 115 Volt, Single Phase that is considered minimal electrical energy consumption.
Question: Are these industrial boilers certified and tested?
Answer: All industrial boilers from the C-B Packaged Boiler Company are factory tested and they are CSA Certified and Labeled.
Question: Can these units be used for apartment building boilers?
Answer: These are considered to be industrial strength boilers, these are more commonly found in factories and warehouses.
Question: What other heating products does the C-B packaged boilers offer?
Answer: They have a wide range of products, besides boilers; they have burners, Water tubes, commercial boilers and other energy saving solution system.
C-B Packaged Boilers are built to last, they are reliable and dependable. By choosing any one of the models above, you are getting a sure fire system that is guaranteed to be the best for your application.
